Choosing The Right Salmon And Steelhead Rod

Recently I had a chance to make a new friend with someone looking to get into fishing. When I asked him what he intended to fish with, he told me about some of the recommendations he’d been given. As a result of the “advice” he received, he ended up with a "tweener". That is, a rod that is in between, or can be used to fish for more than one species.

When choosing a rod, you want to pick one that BEST suits what you are fishing for. As I mentioned in one my earlier articles, when I first started fishing for these larger fish (Salmon/Steelhead), I didn’t know anyone who was really into it. So I asked the guy at the store, and he showed me a "tweener" rod. Let me tell you right away... it doesn’t work like that. It can catch you fish yes, but to really get into fishing, you want to use what works best.

Salmon Rods

Depending on where you intend to fish, these guys can reach the 50 lb class. Are you going to be able to work one of these guys using the 10-20 lb rod (“tweener” rod) you got? Probably not. When fishing for Silvers (Coho) that rod is perfect, as these fish typically run in the 10-20 lb class. Sometimes a bit bigger but you get the idea.

When hooking into a Chinook, you need something with backbone and power. Something heavy enough to handle the ride these fish are going to give you.

Typically, your average salmon rod is rated 12-25 lbs. and 8'6" in length. This rod will give you the strength you need, as well as the length for casting ability. This rod is not going to be quite as sensitive, but that’s okay since Salmon typically are not going to "nibble" at your presentation. They will smell it, maybe think about it, but once decided... they just take it. No pecking at it like a steelhead would.

Once you set the hook... Look out! When that hook gets set these guys will come un-glued. Again, at that point you need some power in the rod in order to control or fight them. Remember, these fish are running 20 lbs on up. You’re in for a fight.

If you’re going to be fishing from a boat, you may want to go a bit smaller in length. Maybe 7'6", or 7'9". You don't need quite as much length when you aren’t casting out far, or not casting at all, as when running Kwik-fish, or bait with diver or back-bouncing.

When these monsters hit and bury your rod you’ll be glad you have that stiffer, heavier action. Again, hang on. Once hooked they’ll go nuts. Not out of the water nuts (usually not), but straight down, and up and down the stretch of water you’re fishing.

Steelhead Rods

Steelhead are totally different critters. Where salmon will bite primarily out of hunger, steelhead will also strike out of irritation. Steelhead will strike at something simply because it is in their way, or territory.

With that in mind you need a rod that is more sensitive where you are able to feel the bite or strike. I recommend a fast action rod. These are also 8'6" in length, but this time we want to go with a 8-12 lb rod. This class of rod is much lighter than those of 12-25 lbs. If you are looking at the G-Loomis rod, you are going to see 8-17 lb extra-fast action. This is the rod of all rods. You will feel everything with this rod. It’s stiff, but surprisingly sensitive. Having that stiffness will also help in your hook set.

In my experience with steelhead, they usually come at you quick. Whether bite or strike, it happens fast. Sometimes they slam you, and sometimes your line or drift will stop, but usually for me it happens quick. Bang, or "tap tap", in these instances you need a quick hook set. That is where a good, light fast action rod is an advantage. The rod picks up on the hit, and gives you time to react. Again, with my IMX rod... there is no missing it. I may miss the hook set, but I know when the fish was there.

When you do set the hook and get a fish on, oh baby, be ready for some action. I love the mass of a salmon, but in my opinion there is no fight like a steelhead. These guys come up out of the water head-shaking, upriver, downriver, you name it.

Again, if you are in the boat you can afford to go a bit shorter for the same scenario as above... plugs, bait/diver, etc ...

Brands can be hard to choose from as there are quite a few.  As I mentioned before, do your homework and choose a rod that will give you the best fishing experience.  Good luck and happy fishing!


Backpacking Fishing Rod

Rainbow, Brown And Brook Trout

Trout are an important part of the fishing tradition. Trout fishermen and women are enthusiastic about the pursuit of the trout. Some consider trout fishing to be the purest form of fishing. The finesse that is required to entice a trout into striking a fly or lure is what appeals to the soul. But don’t worry, trout have endeared the imagination of the trout fishermen and women for years on end. Pure cold water is key to survival of the trout, but Rainbow trout are comfortable in slightly warmer waters.

Rainbow trout are known for their tasty pink flesh and beauty and gameness. The Rainbow trout is a favorite among most fishermen and women anglers. The Rainbow trout appeals to the properly presented flies, baits and lures. It feeds on small worms, minnows, insects, and crustaceans. The sport and dining are two fun things for Rainbow trout anglers.

Originally the rainbow trout was found in the Rockies and west to the pacific ocean and has been distributed far and wide across the United States. Rainbow trout do better in the north and northeast, but in isolated areas in the south the Rainbow trout are found as well. In waters that allow such migration, the rainbow trout will remain in streams until it reaches 6 to 9 inches in length and then travel to lakes or oceans where it bulks up and then returns to the streams or rivers to spawn.

Another trout native to the United States is the Brook trout. Originally found throughout areas with cold clean water, they like the water that does not exceed 68 degrees. As we humans invade the cool shady forest areas it causes the water to warm up and the Brook trout are diminishing in their population. Its primary food source is small crustaceans, mollusks, insects, and other small fish.

Of all trout, Brook trout are the easiest to catch. Amongst places to look for Brook trout fishing are gravel bottom streams with a moderate current, plenty of ponds and waterfalls which include rocks and cover. Over hanging trees for shade and attracting insects and offer protection from preying birds and also are places to look for when fishing for Brook trout.

The trout that can't take slightly warmer water are the Brown trout. The brown trout do not like the warmer water and have taken over some of the fisheries formerly inhabited by the brookies. Brown trout are much more wary than other trout, which helps ensure their longevity in waters where other trout are fished out.

The best spots to look for when fishing for Brown trout are quiet water with logs, under cuts in the banks, over hanging trees and brush, rock shelves. These are Brown trout’s favorite hiding places. Brown trout get to be large in size and become more inclined to feed at night under the protection of darkness.The food that the Brown trout likes are crustaceans, worms, insect and minnows. A popular way to fish for Brown trout is a dry fly.

How to Fish for Lake Trout : How to Choose a Fishing Rod for Trout Fishing

30 Carp Fishing Tips for Beginners and More Experienced Fishermen Pivotal for Success

If you want a simple short-cut to carp fishing success you’ve come to the right place. This advice applies to any form of fishing because it is so vitally important. Here is a list of simple details that I wish I’d discovered when I began carp fishing when information was in much shorter supply. Over the years I have been shocked by the number of newer carp anglers who over-look the ultimate importance of their hooks and their hooking efficiency. So many unnecessary blank sessions come from anglers not realising details they’re missing on the end of their line and more awareness of aspects of the part of their tackle that truly matters the most...

Sometimes it’s very easy for a carp angler to get fixated by new products; like bait flavours, new boilies and pellets etc and the constant stream of new bivvies and ‘camo’ gear that emblazon the advertisement pages of glossy fishing magazines meant to seduce us. These products are very well designed to meet new anglers’ fashions and needs and specific purposes. However , the ability of a hook to actually hook a fish is a pretty old basic need and deserves far more personal attention from many anglers to improve the results of their fishing time and efforts spent.

The basis of the information below arrived from my use of thin wired light-weight ‘Kamasan’ hooks 25 years ago or more, which were extremely effective but occasionally opened-up on hooking bigger carp. The answer came in the form of very precisely sharpening thicker wire hooks like the ‘Kamasan’ low water salmon hooks with the longer shank. I have used this types of hook and many similar designs for years and believe their point’s angle of penetration to be absolutely ideal for my purposes. It’s proven superior in sea fishing applications for me also. (Ask England international Dion McFadden – ha ha ha! )

(You might bear in mind fishing hooks do not ‘hook’ fish by themselves, but require force, from a particular angle of line attached to make the point penetrate effectively enough to do its required job. )

In the ‘British Carp Study Group’ magazine (Spring 2007, ) famous angler and one of the group’s scientific advisers, George Sharman, proposes that an ideal hook point penetration angle / line angle of force of 26 degrees transferred into the hook point is about right, teamed with an in-turned eye. This has shown ideal initial ‘pricking of fish’ and secure hook hold properties with hooks of varied gap sizes. Now I’m not an engineer, but my practical trials and experiences with hooks and indication / conversion to hooked fish leads me to similar conclusions. It may be noted that I’ve fished for more than a couple of decades using bite indicators and various set-ups tuned to register the minimum of line movement since positive benefits of this were first discovered in my winter fishing especially.

I personally use a sharpened hook and I realise this sound ‘antiquated’ perhaps today. But I consider it is vital for many surprising reasons laid out below. Hooks catch fish but many benefit from a little help and close attention to maximise their effectiveness. It takes personal fishing trials and indication / catch rate comparisons over time to achieve true confidence in the hooks you choose to use. Why not use the best designed best quality hooks you can buy for your personal fishing styles and activities, which may be extremely varied indeed.

Sharpening hook has many hidden benefits on the whole of your fishing and confidence levels and even thinking and approach to everything you do to catch fish.

fishing hooks are often an after-thought when compared to the attention brought to bear on expensive carp rods and reels for instance. By disciplining yourself into sharpening every hook you use you not only get a great feel for the action and success of any hook pattern compared over time, but ensures that no faulty eyed or blunt pointed hooks are used which definitely cost you fish.

The easiest way to lose a fish is to give it the chance to consume your bait and have a hook either inefficiently penetrate its skin, or that has the wrong design for your rig purposes or situation, size or shape of bait, hook link material action etc . Your rig is the converter of attempted bait consummation. If it is not maximised in every way possible to convert attentions to your bait into hooked fish you may as well fish with no hook or no bait for the majority of your time spent fishing.

Most fish are lost without an angler ever realising a fish was ‘on’ in the first place, which is a shame and is one area the best most detail oriented tuned-in anglers excel out. This may seem ‘over the top’ but then why should you not benefit from little differences that set the best apart from the rest? Rigs don’t need to be complicated just as with baits, but it’s the attention to details in getting the complete process refined so the right bait and rig for any given fishing situation are the right ones. This can produce above average catch consistency without an angler having the added advantage of access to better bait techniques and technology or more fishing time available.

Don’t forget many hooks bought in packets may not be as sharp as is truly needed. Mostly a carp will hook itself, but on pressured waters a hook any less that past needle sharp can well mean many lost fish you never ever imagined had taken your bait into their mouths. A diamond hook sharpener is essential to me – I’d not bother fishing without treating my hooks to a very precisely formed diameter point and length of point too. I find a hook with a longer point which is well sharpened and thinned along its length makes a massive difference to numbers of bigger fish hooked. This ‘point’ applies to chemically sharpened hooks also.

OK, I’ve over-done sharpening sometimes and lost 40 pound plus fish at the net as the point opens, but would such fish have ‘spit’ the hook anyway and not been hooked? It’s very likely. Most anglers use a heavy lead on any of a range of rigs styles and lengths. But most don’t consider the fact that we are really trying to get around how the fish are feeding in response to angling pressure and associated feeding behaviours in response to what the anglers themselves are doing. Sure a heavy lead and tight line hooks lots of fish, but very often a light lead even at range with a longer hair and hook link will produce more fish and, often more warier bigger fish too.

If you find you are ‘dropping fish’ or ‘pulling out’ of them during the fight, or even getting odd single bleeps on the bite indicators which don’t produce positive action afterwards, try sharpening your hook. I cover my freshly sharpened hook with paste and coat the hair and bait in paste. I often use 2 or 3 types of homemade paste on a rig beside other boilie or paste baits for example in order to vary the solubility and rate of breakdown of bait and give the fish more to ‘think about’. This covers the taste of a sharpened hook and glint of hook metal before it oxidises and fades. Plus paste melting produces unusual bait movement and added dimensions to a curious fish.

In fact using paste on the hook and similar paste in different states in a PVA bag can really trip up fish even better than common set-ups that just use paste on the bait on a hair alone. I like to actually draw attention to the hook itself which is unusual these days. By using fresh balls of paste, air-dried paste and scalded paste bits together with a diversity of strategically included items in the PVA bag many fish seem to lose the grip on their ‘danger reference points’ momentarily. This is after all the aim of all our rig and bait efforts right?

If you’re still not convinced, why not trial identical rigs with sharpened and unsharpened hooks and see the difference over a range of hook designs. The results will be clear; I actually refined my results using rigs and a range of hook patterns to hook very shy biting crucian carp. I could actually observe the fish taking each bait and I was shocked that many makes and designs straight from the packet rarely produced a hooked fish. Often a fish would get hooked and get off in a second, while others stayed in the mouth despite attempts to twist and shake the hook out. I do appreciate that the quality and technology and design involved in hooks has been raised over the years by manufacturers but a personally physically sharpened hook has enormous benefits.

The realities of simple peace of mind and improved confidence that you are fishing as efficiently as possible really counts especially on tougher waters and when fish are not ‘playing the game! ’ Using the most important piece of your fishing tackle which you have intimately inspected and shaped yourself really does produce more fish; getting into the habit of being more detail oriented adds up and the extra effort even influences your effectiveness in fish location and swim choice, thinking and approach to bait and efforts to minimise lazy conventional fishing practices whose edge has already passed.

As its Christmas coming up why not invest in a hook sharpener and really experiment in achieving the longest sharpest hook points possible, perhaps while watching all that Christmas TV. (I have no connection with ‘Fox International’ except I used to fish alongside Cliff (ha ha ha! ) But their bar shaped diamond sharpeners are the most effective tool I’ve used for many years now. ) The effort of sharpening your hooks will really pay you back for sure. It did for carp fishing legend Richard Walker...

Best of all, doing this will raise your confidence when you cast your rig into those cold winter waters, where a fish may only be willing to move just a few inches to feed and an extremely sharp hook is all you may have to initially efficiently hook a winter fish. Especially at times such as this, just a few minutes in concentrated effort sharpening your hooks, could well produce for you a very memorable fish worthy of your efforts.

By Tim Richardson.

Total Fishing Gear - Baits reviewed by Matt Hayes

Best Lures To Use In Fishing

The evolution of fishing gear and accessories along with the development of the bass fishing industry brought about the development of various lures specifically used for different fish species.

There are many types or class of lures and they all depend on what type of fish works for them. Many only work for specific types but some cover a wide range of species of fish.

Below are some of the typical lures used for fishing.

Light Standard Casting Lures

For Standard casting lures, they are mostly able to attract a wide range of fish varieties from albacore, bluefish, bonita, oho and crappies. These lures are also excellent for certain species of bass fish and work best when retrieved from water at low to medium speed. They pass through water with undetectably synthetic material.

Their sizes are excellent for lightweight fish and a host of freshwater species. They range from 1/16 oz . to 3 oz .

The hand painted eye is enticing enough to allow schooling of fish. This feature allows for more chances of trapping one of the target fish in the water.

Heavy Standard Casting Lures

Heavy Standard Casting Lures are excellent for quite heavy fish specifically, walleye and bass. While the lightweight lures are used in most circumstances, it was shown that heavy counterparts provide more reliable fishing output.

Moreover, the heavy standard lures are able to catch fish than diamond and light standard casting lures.

Long Casting/Jigging Lures

Perhaps the most popular among the fishing lures are the long, tapered jigging lures. They are perhaps the most commonly used fishing lures among the fishermen in Florida, Mississippi and Louisiana.

Just recently, it was found out that the long casting lures work best for catching trout and pike. They were also found to effectively catch stripers and bluefish. They can catch tuna and walleye in a breeze!

Unlike heavy standard lures, this gear won’t produce good fish-catch output up to 180-200 ft under water but be sure to effectively match your lure color, bait and related accessories to maximize performance.

Deadly Diamond Lures

These lures are one of the smallest with sizes ranging from 1/8 to 1oz. They can seamlessly attract attention among fish and could form a school of fish in a minute!

The reason is it lies on its structural surface formation and cut. The top handle is cut like a diamond and causes the reflection of light striking on its surface. The diamond lures are best for catching bass fish varieties, crappie and stripers although they work on a small range of fish species.

Crappie fishing tackle Guidelines: Check Out How To Catch Crappie Fish Here!

Fishing Equipment Tips

Jig Weights
Jigs are one of the most versatile game-fish catchers in either fresh or saltwater. It is so important to have the right weight jig for your line weight. If the jig is too heavy for the line, you will loose your jig far too easily. If the jig is too light for the line, its swimming pattern will be disrupted and it won’t be as effective. This simple chart will help you select the correct jig:

  Line Strength                       Jig Size                                                                

    4-lb. Test                                       1/16 to 1/8 oz.

  
    6-lb. Test                                       1/8 to 1/4 oz.

    8-lb. Test                                       1/4 to 3/8 oz.

  10-lb. Test                                      3/8 to 1/2 oz.

    

  12-lb. Test                                       3/8 to 5/8 oz.

  
  14 to 20-lb. Test                             5/8 to 3/4 oz.

Treble Hook Replacement
When replacing the treble hooks on your lures, there are a few things to consider. Chang the split ring too because it is subject to stress and rust. Use a stainless-steel split ring for strength. They do not spread or rust as to most of those that come wit h the plugs. Don’t, however, use stainless steel hooks – they are more easily bent out of shape by a fighting fish. Also, if a fish gets away with your plug, stainless steel will not rust out, as a plain steel hook will. Lastly, get some split-ring pliers – they make changing your hooks easy.

Extra Springs
If you use a spinning reel, you have probably had a spring break when the fishing gets really hot. Always carry extras (use a 35mm-film canister) – and make sure to have a little screwdriver along as well. Practice changing it before you go out

Snag-proof Spinners
Treble hooks are oftentimes “trouble” when using spinners, causing snags. Make them snag-free by removing the treble hook and replace with a single hook. Next thread on a three to four inch twister-tail grub and Texas-rig it.

Down-riggers

Need to drop your bait down deep? Fish are very uncooperative creatures, and don’t always hang out near the surface. If your depth sounder is alerting you to fish down deeper, a down-rigger can really help out.
If you aren’t exactly sure what it is, it is simple. It is a spool holding between 200-600 feet of steel cable. There is a weight attached that is between 6-12 pounds. Additionally there is a quick-release line gripper, just like a clothespin.
The fishing lines from your rods are attached to the quick-release mechanisms. Then the entire thing is dropped down to the depth you want. The bait is far enough from the weight and line gripper not to spook the fish. If you get a bite, the line is released from the gripper, so it is just you and the fish!
Some down-riggers have fish-attractant properties (either electrical, or a special kind of paint).
Down-riggers work great for deep trolling, and some even have an electronic crank that will bring everything up. If you need to get at deeper schools of fish, these are highly recommended.

Ferrules
If there is dirt on your ferrule it can contribute to rapid wear. Make a plug out of wood to help keep the female ferrule clean.
Is your ferrule stuck? Use “Liquid Wrench”, which you can get at any auto-parts store. Just spray it around the male ferrule and let it drip down. In a few minutes you will be able to pull it apart.

Getting Out Line Tangles
Use a pair of large fabric needles to work out these tangles. They have a smooth finish which won’t damage the line as you work the mess out. They are also handy to sew canvas tarp, leather, or carpet strips.

Pocket Tackle Box
Attach a cord to your pocket tackle box, so you don’t worry about dropping it in the water or leaving it behind. Just drill an undersized hole near the back of the box and insert a small eye-screw. A know will stop the cord from slipping through the eye. Just put a clip on the other end so that you can secure the rope to a belt loop or buttonhole.

Avoiding Line Twist
Line twist is the leading cause of fouled fishing. To check for it, pull off enough line to span your outstretched hands – about 6 feet. Next, bring your hands together in front of you, causing the line to drop into a loop. If the loop wraps around itself, you have line twist. Remove it by trolling about 100 feet of line behind a boat. Next install a ball-bearing swivel to prevent future line twist.

Knots Are Key
One of the most important things in losing or landing a hooked fish is your knot. Be certain the knot you are tying is strong and properly tied.
To make sure, tie your usual knot and test it against other knots. A good test is to take two four-inch sections of a broom handle with the screw eye in the center of each. Tie a knot in each screw eye and pull steadily until you see which knot survives. Do it 10 times to get an average.

Anchor Pulley, Keep it Quiet
If you use an anchor pulley, you risk spooking the fish as most pulleys eventually start to squeak. Try this alternative to a pulley:
Get a large U-bolt, a few nuts and washers, and an old-style glass or porcelain fencepost insulator.
Slip the insulator on a U-bolt, drill a couple of holes to accommodate the bolt, and tighten it to the mounting surface. The anchor rope will slide freely in the insulator’s groove, and the anchor lowers and raises as effortlessly as with a pulley, especially once the rope is wet.

Casting Poppers
Casting poppers with a fly rod is awkward. To get better distance bore a slightly undersized small hole in the popper, just big enough to fit a BB in. It should fit snugly and will give you another 30 feet of casting distance at least.

Cheap and Easy Depth Finder
Using two felt-tipped markers (red and black) mark an anchor rope as follows: A single red mark around the rope at five feet, a red and black mark at 10 feet, a single red mark at 15 feet, two black marks at 20 feet, a single red and two black marks at 25 feet and three black marks at 30. Use the color code red for every five feet and multiples of black for 10 feet.

Netting Bait-fish
Increases the efficiency of your minnow scoop by putting a bend in it. Just turn the wire handle down 90 degrees, then push the net back on line. The forward-positioned net makes it much easier to trap a bait-fish against the inside of an open-top bucket.

A Cheap Anchor For A Fishing Boat
For holding a good-sized boat over a rocky bottom, use a large swivel snap to fasten four fee of heavy chain to a standard mushroom anchor. You can get one from a junkyard. The chain boosts the anchor’s weight and holding power, provides convenient handles for lowering and raising, and gives extra leverage when an anchor jams in rocks or snags. When you brings it aboard, coil the heavy chain on a bed of old foam-rubber pads so it doesn’t rattle around or dent your boat. In calm water, simply unsnap the chain and use the mushroom anchor by itself.

 *Special Tip - An amazing secret many fishermen don't know about is The Evening Secret (fishing.com/specialsecret/fishing Equipment Tips.php" target=new>http://www.eveningsecretfishing.com/specialsecret/fishing Equipment Tips.php). It is an amazing way of swarming fish to your spot instantly.



Basic Fishing Gear : Circle Fishing Hooks

Tips For Archery Fishing

Also known as Bow fishing, this is a sport wherein a fisherman uses archery equipment to fish.

A regular hunting bow can be used for fishing by simply attaching a reel to the front of the bow grip.

Archery fishing is especially favored by regular hunters when regular game like deer are off season. This way they can continuously hone their skills for whatever season it may be.

Before engaging in archery fishing, one must first take into consideration the following:

1. A fisherman must be duly licensed. Some states require that an individual have a state license to fish.

2. Equipment. Most states have a predetermined set of approved equipment for archery fishing.

3. Archery Safety Course. Still, some states require that an individual go through an approved safety course for archery fishing to ensure that the individual is well versed with the proper safety precautions and information regarding applicable laws in fishing.

4. Seasons. Bow fishing in some states can only be done in certain seasons. This is to allow the fish to spawn.

5. Species of fish. Some states have rules forbidding archery fishing for some species of fish.

The following skills are necessary for an individual to obtain and practice:

Knot tying. Though it may seem like a simple task, tying knots that will not slip (line for the arrow) are crucial in bow fishing.

Tuning. Tuning is making sure that the bow is at its best working condition. To ensure this, one has to continuously adjust the rest and calibrate the nock.

For a faster tuning process, one may shoot a regular bow-fishing arrow (without the tip) onto a target made of cardboard.

Marksmanship or targeting. Bow fishing and bow hunting, though similar on some aspects, really do differ on many things. Arrows for bow fishing are heavier, have larger arrow tips and, the most obvious one, has a string attached to the arrow.

And since fish are shot in the water, resistance differs as when compared to shooting in the air (for bow hunting of games)

There are various methods or ways of archery fishing. This includes the following:

1. Still hunting. A fisherman selects a place by the lake in which he would wait for passing fish to shoot its bow at.

2. Stalking. This can be done on foot or while on a boat. One is in constant motion in an attempt to locate fish.

3. Ambush. Fish that are best ambushed are the ones that are spawning since they tend to crowd thus increasing chances of target.

Lure Colors Part 1: Understand How Lure Colors Look To Fish

Bait Fishing: Tips And Techniques Check It Out Here!

For anyone leaning about fishing, baiting a hook is a key part of that knowledge. For experienced fisherman there is a constant trial and error process that occurs, and what works is documented for future fishing trips. Seeking new bait fishing methods and techniques to improve your fish catch is very important. The real challenge to fishing with bait is keeping your baits looking natural to the area you are fishing. the closer you can match your bait fishing presentation to the natural food source of the fish you are targeting the more successful you will be.

We all love fishing with artificial lures, we check out all the latest artificial bait imitations, we purchase them just to say we have the latest and greatest in new artificial bait fishing lures or plastics. But when fishing gets really rough and artificials just are not getting it, Guess what? we turn to the real thing live baits! Bait fishing naturals such as Nightcrawlers, bait fish, leeches, crustaceans which include crayfish, scuds, freshwater shrimp, saltwater shrimp, mud shrimp and ghost shrimp, also salamanders such as waterdogs, spring lizards, mudpuppies and leopard frogs. We also turn to fishing with live insects such as aquatic insects which include may flies, stone flies, caddis flies, crane flies, dragon flies. and dobson flies ( hellgrammites). And we cant forget terrestrial adult insect types such as crickets and grasshoppers as well as larva forms of catalpa worms, waxworms, goldenrod grubs, mousees, spikes, euro larvae, and meal worms. To be honest, it is estimated that 75 percent of all fish caught with a hook and a line are caught with live bait. We hope that our bait fishing information will help you when the fishing gets tough and you need to turn to natural baits.

There just hundreds of bait fish that work for freshwater fishing baits, and saltwater baits. You can use bait fish such as bluegills or sunfish, golden shiners, spottail shiner minnows, redbelly dace or rainbow minnows, fathead or tuffy or mudminnow, horney head or redtail chub, and freshwater shrimp baits. Some of the many saltwater bait fishing selections include herring, mackerel, smelt, mullet, mussels, saltwater shrimp, squid and tuna. All these bait fish both freshwater and saltwater are excellent selections for you bait fishing rigs.

Also we can't for get the old reliable nightcrawlers as live bait. Nightcrawlers and other worm type such as the common nightcrawlers, european nightcrawlers, african Nightcrawlers, grunt worms, garden worms, red Wigglers, and leaf worms

Also There are just thousands of freshwater catfisherman so we thought we would mention a little bit about catfish baits. The catfish baits we have identified work for live bait presentations or dead cutbaits and prepared stink baits. These baits include nightcrawlers, suckers, chubs, shiners, goldfish, shad, skipjack herring, bluegills, catalpa worms, grasshoppers, leopard frogs, bullfrogs as cutbait, waterdogs, adult salamanders, crayfish, saltwater shrimp, clams, and blood baits. As you can see Catfish will will eat just about any natural bait presentation you put on your bait fishing rigs.

Most of the baits listed in our article can be caught or made by your self but sometimes these natural baits will be very hard to catch so finding reliable bait shop for for your bait fishing needs will be important. Also some of the baits listed are not normally sold in bait shops to learning to catch them yourself to use on your bait fishing rigs will be important.

Check out Mark's website to get some amazing fishing information and fishing articles loaded with fishing tips about bait fishing that really work!

Download your Free Copies of Our fishing Secret Weapon Special Reports At: fishing.com/blog/free-fishing-report-downloads/" class="hft-urls"> http://bait-fishing.com/blog/free-fishing-report-downloads/

Dark Tackle™ Quick Tip- Where to find Worms for Bait when you run out while fishing